I'm so happy I went with the Niles 1/8 mono trigger cables. The moral of the story here is that sometimes, you try and save a few dollars and in the end you end up spending more. For some...
The Niles cables are here. No time to hook them up yet. My impressions:They are really long! 10 feetThey are thinner than the Radio Shack! I was surprised by that, but then again much of...
Since last week the trigger hasn't been working. I know it's the Radio Shack cables again. So, I ordered the Niles 1/8 from www.natural-sound.com. I'm waiting for them to arrive.
Well, I had my first issue where the trigger stopped working. Sure enough, one of the copper wires had come loose and cut. I got it working by stripping more copper and re-attaching, but I'm going to...
Finally, it's working and working great! Not only did I get it to work but I was able to use the single Xantech to trigger both of my Proceed amplifiers! I simply connected the second trigger to...
I decided to test with the trigger from my Anthem and see if I can get the power supply going. So, here's what happened:I ordered two Xantechs because I had two Proceed amps and my Anthem has three...
Not working. I called Xantech support and they at least told me what was + and - on the power supply. NOW, for those of you doing this, make sure that you call Xantech to confirm which is +...
OK, I got the Xantech, 1/8 triggers from Radio Shack, the diodes, and the power supply. Right now, I did the following:
Cut the triggers in half and followed the diagram to strip them and connect to the Xantech
...
OK, I ordered the Xantech model 599 and I'm waiting for it to arrive. I also ordered the Xantech power supply too that the diagram says I need. Waiting for them to arrive.Here's a link to the...
Ok, I went to Radio Shack and asked for the diodes listed in the previous post. I'm so glad that Glen had posted the actual model/part numbers. I printed the Xantech user manual and brought it with...
